Hi Mel,> I WOULD hold onto the card......hope is not lost.
>
> My old partner Rob Howard, from our PFD days, has HIS Parhelia card
> working across 3 monitors in 3D mode.....and here is how he did
> it........
> Hit the ALT key and select the Options >> Display. You should see 1920 x
> 480… select this. (The only time I did not see it was when one of the
> TFTs was not running in 1024 x 768 mode).
Yeah, this is actually running all three screens in 640x480 modes -- the lowest possible VGA resolution! I've done that, it worked straight away. But it doesn't look good, especially when you've been used to 1280x1024 mode as I have.
I read Bubba's review on www.simhq.com where he said he had it working in 3 x 800 x 600 (i.e. 2400 x 600), which would be acceptable, but really I wanted it to use the native resolution of the screens, i.e. 1024 x 768 (or 3072 x 768). both these modes are actually listed in the FS drop down, but neither work.
Regards,
Pete
-= VPC OffLine Reader Version 1.2 =-
Registered to: Peter L. Dowson
-OLR.PL v1.76-