Printer-friendly version of this topic Bookmark this topic (Registered users only)		Previous Topic | Next Topic
VPC Forums VPC Tech
Original message

James Certificates/Ratings/Crew Stations: "OLR v2.1" 09-29-02, 11:14z  Hi folks, Upgraded my OLR to v2.1 and I'm getting some strange results/observations when I start the prog and hit Get/Send Pass!! As instructed I downloaded both files. Ran OLR18-setup.exe first and told it to install to C:\VPC (the location of my original programme). It then installs but also creates a folder inside VPC called distribution. Now I didn't have this folder there in the first place so I copied every thing within this folder to the VPC main folder. I then ran the OLR and noticed it was still reading (in help) version 1.2!!! No problem I thought as I now closed the OLR and Installed VPCOLR21upgrade. No problem with this I thought as I told it to do the same, install to C:\VPC. I then ran the VPC OLR. Clicked on Get/Send Pass - WOW I thought this is fast, but, nothing happened so I ran it again and yep it started same old speed fast(ish) There was no now posts so I created on and sent it. No problem. I then wanted to send another so I created the post and clicked on Get/Send Pass and yep you guest it WOW this is fast BUT the post I wanted to send is still here!!! Hence this post (if it sends it). Any ideas on what gives?? Regards, James (CONman) Anderson *** The plane in front is a Boeing *** -= VPC OffLine Reader 2.1 =- Registered to: James Anderson -OLR.PL v1.76- Alert Edit | Reply | Reply With Quote | Top

Table of Contents

Subject      Author      Message Date     ID      RE: OLR v2.1 James 09-29-02 1    RE: OLR v2.1 vgbaron 09-29-02 2         RE: OLR v2.1 James 09-29-02 4    RE: OLR v2.1 Ben_Chiu 09-29-02 3         RE: OLR v2.1 James 09-29-02 5

Forums | Topics | Previous Topic | Next Topic

Messages in this topic

James Certificates/Ratings/Crew Stations: 1. "RE: OLR v2.1" 09-29-02, 11:26z  Clerical error corrections >> There was no now posts << Should read no new posts. >> so I created on << Should read so I created one Just another observation I just found is that I don't usually need to quote ALL of the post I'm going to reply to so I highlight the section I need and right click and use copy and paste. This function is now defunct in v2.1 all it does is bring up a Forum Properties tag!! Any chance of us getting the previous function back please? Regards, James (CONman) Anderson *** The plane in front is a Boeing *** -= VPC OffLine Reader 2.1 =- Registered to: James Anderson -OLR.PL v1.76- Remove | Alert Edit | Reply | Reply With Quote | Top

vgbaron Certificates/Ratings/Crew Stations: 2. "RE: OLR v2.1" 09-29-02, 18:17z  > Just another observation I just found is that I don't usually need to > quote ALL of the post I'm going to reply to so I highlight the section I > need and right click and use copy and paste. This function is now > defunct in v2.1 all it does is bring up a Forum Properties tag!! Any > chance of us getting the previous function back please? James - For technical reasons, the right click cut/copy/paste menu will no longer be available in the main window. You have two options - in the main window you can highlight the selection and CTL-C to save and CTL-V to paste or probably the most efficient way to go is to use the quote message function in the reply box to quote the entire message. You can then highlight the parts you DON'T want and either right click and deal with them or just press delete. This leaves you with the parts you want quoted already with the '>>' added. HTH, Vic Of All the Things I've lost, I miss my mind the most! -= VPC OffLine Reader 2.1 =- Registered to: Vic Baron -OLR.PL v1.81- Remove | Alert Edit | Reply | Reply With Quote | Top

James Certificates/Ratings/Crew Stations: 4. "RE: OLR v2.1" 09-29-02, 22:06z  Hi Vic, Thanks for the response my friend. Looks like doing things the long way round Regards, James (CONman) Anderson *** The plane in front is a Boeing *** -= VPC OffLine Reader 2.1 =- Registered to: James Anderson -OLR.PL v1.76- Remove | Alert Edit | Reply | Reply With Quote | Top

Ben_Chiu Certificates/Ratings/Crew Stations: 3. "RE: OLR v2.1" 09-29-02, 18:24z  Greetings James: > -= VPC OffLine Reader 2.1 =- > Registered to: James Anderson > -OLR.PL v1.76- From your tagline, it looks like OLR.pl 1.8 was not installed properly. It needs to be installed into your Perl/bin folder. Please run OLR18-setup.exe again. Ben -= VPC OffLine Reader 2.1 =- Registered to: Ben Chiu -OLR.PL v1.80- Remove | Alert Edit | Reply | Reply With Quote | Top

James Certificates/Ratings/Crew Stations: 5. "RE: OLR v2.1" 09-29-02, 22:06z  Hi Ben, Will give it another shot Regards, James (CONman) Anderson *** The plane in front is a Boeing *** -= VPC OffLine Reader 2.1 =- Registered to: James Anderson -OLR.PL v1.76- Remove | Alert Edit | Reply | Reply With Quote | Top

Lock | Archive | Remove

Forums | Topics | Previous Topic | Next Topic

Select another Forum ===================== FlightAdventures Virtual Pilot Center™ (Forums)   |--FSFORUM   |--Aerobatics and Air Shows   |--The Future for GA   |--Airframes and Powerplants   |--Airlines and Airliners   |--Fighters and Warbirds   |--Flight Training   |--Aviation Safety   |--File Library - Upload, Search, and Download   |--VPC Tech